ACK Technology, Inc.  

  The Cooling Specialist

  Back to  Application Notes

      Section Two    Section One     Section Three

• Q vs delta T & R (4mm)

• Q vs delta T & R (20 degree C)

• Qmax vs Thinckness (4mm)

• Qmax vs Bending (4mm)

• Qmax vs Length (4mm)

• Qmax vs Double Bending (4mm)

Q vs delta T & R (4mm)

Go Back Top

Q vs delta T & R (20 degree C)

Go Back Top

Qmax Vs Thinckness (4mm)

Go Back Top

Qmax Vs Bending (4mm)

Go Back Top

Qmax Vs Length (4mm)

Go Back Top

Qmax Vs Double Bending (4mm)

Go Back Top